The McSEIS-SW is a 24ch seismic survey instrument and designed for high-accuracy “surface wave survey” and “refraction seismic survey”. It can be used for a wide variety of applications. Through the analysis of its data, the 2D S-wave velocity structure of the ground can be obtained easily. Also, the N-value structure of the ground can be estimated by using data of Swedish sounding test, standard penetration test and so on.
Our special programs make it possible to carry out works ranging from measurement to data analysis effectively on site. In addition, a commercial laptop PC is used as a control unit, so this system is always available with a latest PC.
■ Compact, lightweight and low-power consumption design
■ Splash-proof case
■ Its control software can be used on a commercial laptop computer (Windows : Ethernet is required)
■ Special programs, SeisImager/SW & SeisImager/2D, are available for the analysis of its data
Numbers of channels | 24ch (fixed) |
---|---|
Input impedance | 20KΩ, 0.02μF |
Gain | 24dB or 36dB |
Frequency band | 1.75Hz to 8KHz |
A/D resolution | 24 bit |
Sampling rates | 0.0625, 0.125, 0.25, 0.5, 1.0, and 2.0msec |
Data length | 1024, 2048, 4096, 8192, and 16384 words |
Pre-trigger | 256 words |
Trigger delay | 0 to 9,999msec |
Data format | SEG2 |
Destination to data save | Storage device in control PC (such as hard disk drive) |
Data transfer | Ethernet (ECat5 or above) |
Power | DC12V (external battery) |
Consumption current | 15W or above |
Operation temperature | -30 to 70℃ |
Main unit chassis | Splash-proof structure |
Dimension | 254 (W) × 305 (D) × 177 (H) mm |
Weight | approx. 3.8 kg |