TOP > Products > Products list > Point Load Tester

Point Load Tester

The Point Load Tester is a uniaxial compression testing instrument designed for reading out pressure when a specimen is broken, and it consists mainly of a main unit, a pressure gauge and a hydraulic pump. It is very easy to carry the system and make measurements at a site because of its compact and lightweight design. Also, it takes only a short time to carry out a test, and all the works can be done easily by one person.

Feature

■ Pressure can be easily read out by its bourdon tube pressure gauges

■ Two bourdon tube pressure gauges (5 MPa and 70 MPa) are attached as standard

■ Size of a specimen can be measured by checking a scale when it is placed in the unit

Specification

Maximum load 45 kN
Maximum specimen size φ 80 mm
Jack Stroke : Max. 25 mm
Piston cross-sectional area : 640 sq mm
Discharge pessure : Max. 70 MPa
Pressure gauge 5 MPa (for low pressure)
70 MPa (for high pressure)
Hydraulic pump Maximum pressure : 70 MPa
Tank oil volume : 330 cu cm
Operating temperature -10 to 50 degree C
Dimension 360 (H) x 180 (W) x 145 (D) mm
Weight Main unit : approx. 16 kg (including a case)
Hydraulic pump : approx. 9.5 kg (including a case, pressure gauges. etc.)

Products

▲ To Top